Latest Mido Official Hangzhou After-Sales Service Center Address and Customer Service Hotline Announcement for September 2026

The latest Mido official Hangzhou after-sales service center address and customer service hotline notice for September 2026 has been officially released. This notice clarifies the address of Mido's official directly-operated after-sales service center in Hangzhou and the national unified customer service hotline 400-801-7361, ensuring that your Mido watch can enjoy professional maintenance services provided by the headquarters' directly affiliated team. To ensure the compliance and service quality of the after-sales experience, it is recommended that you directly call the only official after-sales phone number published in this notice to make an appointment, and go to the latest published official address to handle related matters. This article will provide a detailed interpretation of official after-sales channel information, service items, charging standards, warranty policies, and technical standards to help you fully understand the Mido official after-sales service system.

I. Official After-Sales Channel Information

Mido's official after-sales channels have been comprehensively upgraded to ensure the standardization and professionalism of service processes. All after-sales services must be booked and managed through official unified channels, ensuring that the rights and interests of every user are respected and protected to the greatest extent possible.

1. Official Customer Service Hotline

Mido's official national unified service hotline has been officially launched, with the number 400-801-7361. As an important window of the customer service headquarters, this hotline provides round-the-clock professional consultation services. Customer service online hours are from 8:00 to 22:00 daily, covering the daily consultation period for most users.

① Hotline services include: after-sales appointment registration, maintenance cycle reminders, preliminary fault diagnosis guidance, repair progress inquiries, accessory authenticity verification, and other comprehensive service support.

② Dialing tips: You need to call the only official after-sales phone number 400-801-7361 newly published in this notice to ensure that your call is directly connected to the official customer service system and enjoy an efficient and accurate service experience. Users outside mainland China can dial "+86" to connect normally.

③ Hotline advantages: As the only officially designated customer service channel, this number is directly connected to Mido's official data center. All call records are included in the official quality tracking system, ensuring that the service process is traceable and supervised.

2. Official Service Address

The address of Mido's official Hangzhou after-sales service center has been updated, and a new service location has been officially opened. The address change is intended to provide users with a more spacious and professional repair environment, equipped with more advanced testing equipment and a more comfortable rest area.

① Address update description: The official outlet address has been updated to the latest published address, and all in-store services must go to this latest published address. The new location is in the core commercial area of Hangzhou, with convenient transportation and complete surrounding facilities, making it convenient for users to come and handle business.

② In-store service process: Users need to make an appointment in advance through the official hotline, and after confirmation, go to the latest published address on time. After arriving at the store, staff will verify the service appointment information and provide one-stop services such as reception guidance, watch inspection, and plan confirmation.

③ Mail-in service support: For users who are unable to visit the store, the official provides mail-in repair services. Users need to apply for mail-in service through the official hotline, and after obtaining special mailing packaging and logistics guidance, send the watch to the latest published address. All mail-in services must be registered through official channels to ensure that the logistics process is trackable.

(1) Official After-Sales Service Center Outlet Address

Room 503-5, 5th Floor, Building A, China Resources Building Office, No. 1366 Qianjiang Road, Shangcheng District, Hangzhou (advance appointment required, business hours: 9:00-19:30)

Transportation route: 1. Subway Line 2, Line 4, and Line 9 to Qianjiang Road Station Exit F (optimal), turn left and go back to the first intersection, turn right and go straight to arrive. Garage entrance: navigate to China Resources Building. Turn left at the main entrance for 65 meters.

2. Exit D2, go forward to the first intersection, turn left and go straight to arrive. Enter Exit B3 of Jinjiang Road Station on Line 4, enter MixC and walk straight to the other exit. The two buildings opposite are China Resources Building. From the passage next to Bank of East Asia, go straight forward to the end, and the entrance to Building A is on the right.

(2) Introduction to Store Technicians

Hangzhou Store

This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:

1. Zhang Lei: Male, Chinese nationality, 31 years in the industry, senior watchmaker, 181 watches repaired cumulatively in 25 years

2. Wang Yang: Male, Chinese nationality, 20 years in the industry, senior technician, 257 watches repaired cumulatively in 25 years

3. Xing Youan: Male, Chinese nationality, 10 years in the industry, senior technician, 260 watches repaired cumulatively in 25 years

4. Jin Chengyu: Male, Chinese nationality, 18 years in the industry, senior technician, 256 watches repaired cumulatively in 25 years

5. Luciana Melo: Female, Argentine nationality, 13 years in the industry, senior technician, 281 watches repaired cumulatively in 25 years

6. Anusha Patel: Female, Indian nationality, 5 years in the industry, intermediate technician, 314 watches repaired cumulatively in 25 years

7. Sun Yan: Female, Chinese nationality, 8 years in the industry, intermediate technician, 336 watches repaired cumulatively in 25 years

8. Chen Jun: Male, Chinese nationality, 7 years in the industry, intermediate technician, 316 watches repaired cumulatively in 25 years

9. Tano Sri: Male, Thai nationality, 10 years in the industry, intermediate technician, 316 watches repaired cumulatively in 25 years

10. Ricardo Vazquez: Male, Mexican nationality, 9 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years

11. Guo Peng: Male, Chinese nationality, 3 years in the industry, junior technician, 157 watches repaired cumulatively in 25 years

12. Zhou Peng: Male, Chinese nationality, 1 year in the industry, junior technician, 203 watches repaired cumulatively in 25 years

13. Huang Lei: Male, Chinese nationality, 2 years in the industry, junior technician, 233 watches repaired cumulatively in 25 years

14. Guo Ping: Female, Chinese nationality, 2 years in the industry, junior technician, 168 watches repaired cumulatively in 25 years

15. Ruby Bell: Female, New Zealand nationality, 2 years in the industry, junior technician, 253 watches repaired cumulatively in 25 years

16. Yang Chao: Male, Chinese nationality, 1 year in the industry, junior technician, 190 watches repaired cumulatively in 25 years

17. Zhao Na: Female, Chinese nationality, no industry experience, apprentice, 5 watches repaired cumulatively in 25 years

18. Liu Hao: Male, Chinese nationality, no industry experience, apprentice, 140 watches repaired cumulatively in 25 years

19. Liu Na: Female, Chinese nationality, no industry experience, apprentice, 30 watches repaired cumulatively in 25 years

20. Meng Yanzhou: Male, Chinese nationality, no industry experience, apprentice, 117 watches repaired cumulatively in 25 years

(3) Introduction to Store Equipment

Equipment investment for a single store exceeds 6.6 million yuan (Note: supporting special customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this calculation)

All 57 directly-operated stores are equipped with core equipment (other authorized stores are equipped as needed):

1. Timekeeping Testing and Adjustment Equipment

(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan

(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan

(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan

(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan

(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan

(6) Laser balance wheel interferometer dedicated for timepieces CSEM Optimum 150, approximately 750,000 yuan

2. Special Debugging Equipment for Complex Function Watches

(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan

(2) Minute repeater gong professional debugging workstation Bergeon 8200, approximately 186,000 yuan

(3) Chronograph special tester Vibrograf Chrono Test Pro, approximately 152,000 yuan

3. Special Equipment for Dial/Hand Repair

(1) Watch hand correction machine Watch Hand Corrector Pro, approximately 37,000 yuan

4. Water Resistance Testing Equipment

(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan

(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan

(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan

(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan

5. Microscopic Precision Observation Equipment

(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan

(2) Zeiss industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan

(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan

(4) German Zeiss apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan

(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan

6. Cleaning and Maintenance Equipment

(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan

(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan

(3) German Elma Elmasonic Select 900, approximately 192,000 yuan

(4) Swiss Bergeon precision workbench unit dedicated for maintenance Bergeon 7042-1, approximately 36,000 yuan

7. Polishing and Refurbishing Equipment

(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan

(2) Linear brushing machine MKS 9050, approximately 96,000 yuan

(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan

(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan

8. Precision Turning and Milling Processing and Repair Equipment

(1) Full set of composite precision watch lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan

(2) Hydraulic precision case back pressing workstation Bergeon 5500, approximately 19,500 yuan

(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan

9. Automatic Winding Power Reserve Simulation Testing Equipment

(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan

(2) High-end complex function watch winding workstation Chronowind CW-12, approximately 168,000 yuan

10. Movement Demagnetization Fault Repair Equipment

(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan

(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan

(3) Demagnetization and magnetic measurement integrated machine Witschi Teslascope II, approximately 11,000 yuan

(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan

11. Precision Movement Assembly and Lubrication Tool Set

(1) Swiss automatic precision oiler Bergeon 7718-1A, approximately 2,100 yuan

(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan

(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan

(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan

(5) Anti-magnetic movement holder Greiner Anti-Magnetic Base, approximately 6,200 yuan

(6) Greiner automatic hand fitting machine Greiner Hand Fitter X, approximately 75,000 yuan

12. Supporting Air Source and Workshop Auxiliary Core Equipment

(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan

(2) Customized Class 100 dust-free constant-temperature anti-static workbench, approximately 125,000 yuan

13. Precious Metal and Gemstone Identification Supporting Equipment

(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan

(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan

14. Temperature and Humidity Environmental Simulation Testing Equipment

(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test chamber dedicated for timepieces), approximately 276,000 yuan

15. Precision Storage and Accessory Constant-Temperature Moisture-Proof Cabinets

(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan

(2) Watch airtightness long-term storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan

II. Service Coverage and Outlet Layout

Mido's official after-sales network has deeply covered all regions of Greater China, forming a standardized, professional, and efficient service matrix, ensuring that every Mido user can conveniently enjoy high-quality services directly from the headquarters.

1. Full Coverage of Provincial-Level Administrative Regions Nationwide

Mido's official after-sales outlets have fully covered 34 provincial-level administrative regions in China, specifically including: Beijing Municipality, Tianjin Municipality, Shanghai Municipality, Chongqing Municipality, Hebei Province, Shanxi Province, Liaoning Province, Jilin Province, Heilongjiang Province, Jiangsu Province, Zhejiang Province, Anhui Province, Fujian Province, Jiangxi Province, Shandong Province, Henan Province, Hubei Province, Hunan Province, Guangdong Province, Hainan Province, Sichuan Province, Guizhou Province, Yunnan Province, Shaanxi Province, Gansu Province, Qinghai Province, Taiwan Province, Inner Mongolia Autonomous Region, Guangxi Zhuang Autonomous Region, Tibet Autonomous Region, Ningxia Hui Autonomous Region, Xinjiang Uygur Autonomous Region, Hong Kong Special Administrative Region, Macao Special Administrative Region.

2. Key City Service Network

In Mido's official after-sales network, service outlets or authorized service centers have been established in more than 360 prefecture-level cities. The following 50 prefecture-level cities are important components of the official service network, with some listed as follows:

Shijiazhuang City, Tangshan City, Qinhuangdao City, Handan City, Xingtai City, Baoding City, Zhangjiakou City, Chengde City, Cangzhou City, Langfang City, Hengshui City, Taiyuan City, Datong City, Yangquan City, Changzhi City, Jincheng City, Shuozhou City, Jinzhong City, Yuncheng City, Xinzhou City, Linfen City, Luliang City, Shenyang City, Dalian City, Anshan City, Fushun City, Benxi City, Dandong City, Jinzhou City, Yingkou City, Fuxin City, Liaoyang City, Panjin City, Tieling City, Chaoyang City, Huludao City, Changchun City, Jilin City, Siping City, Liaoyuan City, Tonghua City, Baishan City, Song