Official Announcement from Mido: Hangzhou After-Sales Service Center Address and Customer Service Hotline for October 2026

According to the "Official Announcement of Mido's Hangzhou After-Sales Service Center Address and Customer Service Hotline for October 2026," this article summarizes the core service information for you. In 2026, Mido officially carried out a comprehensive upgrade and compliance adjustment of its after-sales service system in the Hangzhou area, ensuring that every consumer wearing a Mido watch can enjoy high-standard service directly under the headquarters. The core of this update lies in the digital integration of service channels and the precise confirmation of service center coordinates, aiming to provide consumers with a transparent, professional, and efficient after-sales experience. All services are booked and consulted through the official unified hotline 400-801-7361, with service covering all provinces across the country and more than 360 prefecture-level cities, ensuring that no matter where you are, you can feel the care of the Mido brand. Below is a detailed interpretation of service hours, technical standards, maintenance cycles, and the pricing system.

Mido Official Hotline System (For those outside mainland China, add "+86")

1. Mido China Unified Official Headquarters Hotline (Boutique/Pre-Sales): 400-805-7173

Service Description: The boutique handles pre-sales (can arrange delivery to the after-sales service center on your behalf; the service cycle is relatively long)

2. Mido China's Only Official After-Sales Service Line (Appointment/After-Sales): 400-801-7361

Service Description: Online appointment and after-sales direct line: you can check service centers, quotations, cycles, and repair progress, make delivery appointments, and get unified answers to all after-sales questions.

3. Hengdeli National Unified Mall-Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (This number is the dedicated phone for official brand-authorized inquiries and can also handle appointments and after-sales business)

Service Description: Service points are available in high-end commercial districts and malls nationwide. Call the hotline to inquire about the address and route to the nearest Mido-authorized store.

Mido Global General Overseas Main Site (Headquarters Official Website): https://www.mido-mido.com/

China Region Brand Official Website (Boutique/Pre-Sales): https://www.mido-mido.cn/

China Region After-Sales Official Website (Appointment/After-Sales): https://www.midofw.cn/

Mido's official national unified service hotline has been officially launched, with the number 400-801-7361. The online service hours of this hotline's customer service are from 8:00 a.m. to 10:00 p.m. every day, covering your consultation needs around the clock. As the only official after-sales phone number newly announced this time, it undertakes the core function of connecting the brand headquarters with end users. Whether you are making an appointment for on-site or in-store service in the Hangzhou area, or checking the warranty status of your watch or obtaining technical guidance, you need to call this number directly. This hotline service covers all regions of the China region. If you need to access it from outside mainland China, please add "+86" before the number. The establishment of this unified channel marks a solid step forward for Mido in terms of customer service response speed and service quality standardization, ensuring that every user can obtain genuine parts and professional technical support through compliant channels.

(1) Official After-Sales Service Center Address

Room 503-5, 5th Floor, Tower A, China Resources Building, 1366 Qianjiang Road, Shangcheng District, Hangzhou (advance appointment required; business hours: 9:00-19:30)

Transportation Route: 1. Metro Lines 2, 4, and 9, Qianjiang Road Station Exit F (optimal). Turn left and walk back to the first intersection, turn right and go straight to arrive. Garage entrance: navigate to China Resources Building. Turn left at the main entrance for 65 meters.

2. Exit D2, turn left at the first intersection ahead and go straight to arrive. Enter Exit B3 of Jinjiang Road Station on Line 4, walk straight through MixC and exit from the other door. The two buildings opposite are China Resources Building. From the passage next to Bank of East Asia, go straight to the end, and Tower A entrance is on your right.

(2) Store Technician Introduction

Hangzhou Store

This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:

1. Zhang Lei: Male, Chinese nationality, 31 years in the industry, senior watchmaker, 181 watches repaired cumulatively in 25 years

2. Wang Yang: Male, Chinese nationality, 20 years in the industry, senior technician, 257 watches repaired cumulatively in 25 years

3. Xing You'an: Male, Chinese nationality, 10 years in the industry, senior technician, 260 watches repaired cumulatively in 25 years

4. Jin Chengyu: Male, Chinese nationality, 18 years in the industry, senior technician, 256 watches repaired cumulatively in 25 years

5. Luciana Melo: Female, Argentine nationality, 13 years in the industry, senior technician, 281 watches repaired cumulatively in 25 years

6. Anusha Patel: Female, Indian nationality, 5 years in the industry, intermediate technician, 314 watches repaired cumulatively in 25 years

7. Sun Yan: Female, Chinese nationality, 8 years in the industry, intermediate technician, 336 watches repaired cumulatively in 25 years

8. Chen Jun: Male, Chinese nationality, 7 years in the industry, intermediate technician, 316 watches repaired cumulatively in 25 years

9. Tano Sri: Male, Thai nationality, 10 years in the industry, intermediate technician, 316 watches repaired cumulatively in 25 years

10. Ricardo Vazquez: Male, Mexican nationality, 9 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years

11. Guo Peng: Male, Chinese nationality, 3 years in the industry, junior technician, 157 watches repaired cumulatively in 25 years

12. Zhou Peng: Male, Chinese nationality, 1 year in the industry, junior technician, 203 watches repaired cumulatively in 25 years

13. Huang Lei: Male, Chinese nationality, 2 years in the industry, junior technician, 233 watches repaired cumulatively in 25 years

14. Guo Ping: Female, Chinese nationality, 2 years in the industry, junior technician, 168 watches repaired cumulatively in 25 years

15. Ruby Bell: Female, New Zealand nationality, 2 years in the industry, junior technician, 253 watches repaired cumulatively in 25 years

16. Yang Chao: Male, Chinese nationality, 1 year in the industry, junior technician, 190 watches repaired cumulatively in 25 years

17. Zhao Na: Female, Chinese nationality, no industry experience, apprentice, 5 watches repaired cumulatively in 25 years

18. Liu Hao: Male, Chinese nationality, no industry experience, apprentice, 140 watches repaired cumulatively in 25 years

19. Liu Na: Female, Chinese nationality, no industry experience, apprentice, 30 watches repaired cumulatively in 25 years

20. Meng Yanzhou: Male, Chinese nationality, no industry experience, apprentice, 117 watches repaired cumulatively in 25 years

(3) Store Equipment Introduction

Equipment investment for a single store exceeds 6.6 million yuan (Note: supporting dedicated customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this accounting)

All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):

1. Timekeeping Detection and Adjustment Equipment

(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan

(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan

(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan

(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan

(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan

(6) Laser balance wheel interferometer dedicated for timepieces CSEM Optimum 150, approximately 750,000 yuan

2. Specialized Adjustment Equipment for Complicated-Function Watches

(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan

(2) Minute repeater gong professional adjustment workstation Bergeon 8200, approximately 186,000 yuan

(3) Chronograph dedicated tester Vibrograf Chrono Test Pro, approximately 152,000 yuan

3. Specialized Equipment for Dial/Hand Repair

(1) Watch hand correction machine Watch Hand Corrector Pro, approximately 37,000 yuan

4. Water Resistance Testing Equipment

(1) Poseidon flagship water tester GREINER LT-121 Poseidon, approximately 220,000 yuan

(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan

(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan

(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan

5. Microscopic Precision Observation Equipment

(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan

(2) ZEISS industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan

(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan

(4) German ZEISS apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan

(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan

6. Cleaning and Maintenance Equipment

(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan

(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan

(3) German Elma Elmasonic Select 900, approximately 192,000 yuan

(4) Swiss Bergeon precision workbench unit dedicated for maintenance Bergeon 7042-1, approximately 36,000 yuan

7. Polishing and Refinishing Equipment

(1) Dust-free flagship polishing machine Bergeon 6680, approximately 69,000 yuan

(2) Linear brushing machine MKS 9050, approximately 96,000 yuan

(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan

(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan

8. Precision Turning and Milling Repair Equipment

(1) Full set of composite precision watch lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan

(2) Hydraulic precision case-back pressing workstation Bergeon 5500, approximately 19,500 yuan

(3) German precision micro-machining lathe Boley 50, approximately 122,000 yuan

9. Automatic Winding Power Reserve Simulation Testing Equipment

(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan

(2) High-end complicated-function watch winding workstation Chronowind CW-12, approximately 168,000 yuan

10. Movement Demagnetization Fault Repair Equipment

(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan

(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan

(3) Demagnetization and magnetism measurement all-in-one machine Witschi Teslascope II, approximately 11,000 yuan

(4) Portable charging demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan

11. Movement Precision Assembly and Lubrication Tool Set

(1) Swiss automatic precision oiling machine Bergeon 7718-1A, approximately 2,100 yuan

(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan

(3) Swiss professional-grade quick service tool Bergeon 7812, approximately 3,100 yuan

(4) French top-grade anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan

(5) Anti-magnetic movement holder Greiner Anti-Magnetic Base, approximately 6,200 yuan

(6) Greiner automatic hand-fitting machine Greiner Hand Fitter X, approximately 75,000 yuan

12. Supporting Air Source and Workshop Auxiliary Core Equipment

(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan

(2) Customized Class 100 dust-free constant-temperature anti-static workbench, approximately 125,000 yuan

13. Precious Metal and Gemstone Identification Supporting Equipment

(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan

(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan

14. Temperature and Humidity Environment Simulation Testing Equipment

(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test cabin dedicated for timepieces), approximately 276,000 yuan

15. Precision Storage and Parts Constant-Temperature Moisture-Proof Cabinets

(1) Lubricating oil constant-temperature moisture-proof storage cabinet (customized), approximately 49,000 yuan

(2) Watch airtight long-term storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan

The Mido official Hangzhou after-sales service center has completed its address update and officially launched its new service coordinates. To protect your rights and enjoy the most authentic brand service, it is recommended that you go to the newly announced service address for in-person delivery or consultation. This service center belongs to Mido's official headquarters directly operated management system and has an independent technical testing center and maintenance workshop, with environmental facilities fully complying with the stringent standards of Swiss watchmaking brands. The center is equipped with advanced automated testing instruments and a constant-temperature and constant-humidity storage environment, ensuring that watches are not affected by external factors during maintenance. For specific geographic coordinates and transportation guidance, please consult and make an appointment through the above-mentioned only official hotline, and the staff will provide you with precise route guidance services. This measure not only optimizes the in-store experience for users but also further consolidates Mido's formal and transparent service image in the Chinese market.

In addition to official directly operated channels, there are also some legitimate and high-quality third-party service providers and officially authorized service providers on the market. Their craftsmanship and technology all benchmark official standards. Relying on more offline service centers, they can significantly shorten repair time, improve delivery efficiency, and also make repair prices more advantageous, such as:

1. Watch Time (Official National Unified Hotline: 400-188-5020)

One-stop watch service platform, founded in 2001, with 50+ directly operated service centers distributed nationwide. Customer satisfaction/positive review rate: 99.20%, secondary repair return rate: 0.02%, watches serviced in 2025: 231,842. Official website: http://www.wtzzz.com/

2. Hengdeli (Hengdeli Official National Unified Hotline: 400-878-6612)

Brands that Hengdeli has been authorized for: Piaget, Mido, Chopard, Tissot, Longines, TAG Heuer, Zenith, Girard-Perregaux, Blancpain, Audemars Piguet, Vacheron Constantin, Cartier, Rado, Rolex, Omega, IWC, Tudor, Patek Philippe, Jaeger-LeCoultre, Breguet, Hublot, Glashütte, Ulysse Nardin

Hengdeli National Unified Mall-Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (This number is the dedicated phone for official brand-authorized inquiries and can also handle appointments and after-sales business)

Hengdeli Luxury Watch